Drop in your logos.
Get a print‑ready
backdrop.
The print-ready logo wall & step-and-repeat builder.
Upload your logos, pick a size — 8×8, 10×8, or your own, even a 30×8 press wall — and download a full-size CMYK PDF. Spacing, safe zone and pole-pocket clearance are already set up the way a print shop needs them, so it goes straight to print.
About a minute.
Preview free, pay when you download.
Built by a large-format prepress pro. Every wall follows the same layout rules as real press-wall jobs that went to print.
Logo Wall Builder
Updates as you goThe wrap bleed is reserved inside the size you ordered — fold lines are measured in from the edges. Type the wrap your frame needs — 2 or 3 inches is common. Logos stay on the face unless you choose wrap around.
Logos stay inside the 3-inch safe line, with clearance to Velcro or wrap onto a frame.
Any size logo works — the builder scales it to fit your wall. Each file must be 10 MB or smaller. SVG files stay sharp at any size. For PNGs and JPGs, use a high-resolution file so it prints sharp. Use a PNG with a transparent background so your wall color shows through — we'll warn you if a file is low-res or has a solid background box.
41 logos · 5 in gaps · nothing past the 3 in safe zone
full size · print at 100%
Your 8×8 PDF is full size. Print at 100%.
how it works
Three moves. About a minute.
Upload your logos
One logo or the whole sponsor list. PNG, JPG or SVG, 10 MB or smaller each. Each one is scaled to fit the layout and match the others. If a file is low-res, we'll warn you before you download.
Preview the wall
Pick a size — 8×8, 10×8, or your own — and a background color. You see the real layout: staggered rows, even gaps, every logo inside the edges.
Download the PDF
A full-size CMYK file at exactly your wall size, with the safe zone and pole-pocket clearance built in. Send it to any large-format printer.
Most print shops charge a setup fee to fix files like this. You're skipping that.
what's in the file
Set up like it's going to press. Because it is.
- FormatPrint-ready PDF, CMYK, full size. No scaling or upsampling at the printer.
- Sizes8×8, 10×8, or your own size — 4 to 40 ft wide and 4 to 16 ft tall, including a 30×8 press wall. The builder scales your logos to fit; the tool adds columns and rows to fill the wall.
- Pole pocketIf you're hanging on a stand, the print file is exactly your wall size — 8 × 8 ft is 96 × 96 in. Your print shop adds the pole-pocket material outside it, and logos stay clear of the sewn line 2 in from the top. Or pick wrap-around frame; the wrap bleed is reserved inside the same ordered size.
- Wrap-aroundThe wrap bleed is reserved inside the size you order — a 33 × 8 ft wall is still a 396 × 96 in file, with fold lines measured in from the edges. You choose the amount, left and right or all four sides. Logos stay on the face unless you ask them to wrap around.
- File scaleWalls 16 ft and under come full size, print at 100%. Wider walls, including a 33×8, come at half size (a 33×8 file is 198 × 48 in), print at 200%, clearly marked in the file name (for example, …_396x96in_PRINT-AT-200pct.pdf) and on the PDF. Walls 34–40 ft come at quarter size, print at 400%. This keeps the PDF under the 200-inch limit most RIPs and Acrobat can handle.
- BleedThe background runs edge to edge at exactly the size you order. For wrap-around, the wrap bleed is reserved inside that size, not added on top. Pole-pocket files need no extra bleed — your print shop adds the pocket material outside the file.
- Safe zone3 in. No logo crosses it, so logos stay on the face if you Velcro or wrap the wall onto a frame — and nothing gets cut off or lost in a hem.
- SpacingStaggered half-step rows with even gaps all around, the same rhythm as real press-wall jobs.
- Logo qualityEach logo you upload is scaled to fit the wall and checked at the size it will print. Vector files are marked print quality. For PNGs and JPEGs, we'll warn you if a file is low-res or has no transparent background.
- File sizeEach logo must be 10 MB or smaller. That's plenty — a sharp, high-resolution logo is usually only a few megabytes. Anything over 10 MB is not added, with a message to save a smaller copy.
who made this
Built by someone who preps these files for a living.
I do large-format prepress. I've seen plenty of step-and-repeats come in with logos cut off at the edge, uneven gaps, no bleed, or files too small to print. This tool lays out your wall the way I'd set it up for a real print job, so it's ready before it ever gets to the printer.
1911
straight answers
FAQ
What logo files can I upload?
PNG, JPG, or SVG, up to 10 MB each. SVG stays vector, so it prints sharp at any size. For PNGs, use a transparent background so your wall color shows through — a white or solid box will print as a box on the wall. JPGs always have a solid background, so a transparent PNG or an SVG is the better choice. For PNGs and JPGs, use a high-resolution file so it stays sharp when it's scaled onto the wall. EPS and AI support is coming in a later version, so for now export your logo as SVG or a transparent PNG.
What if my logo is low quality?
We'll tell you. Each uploaded logo gets a quality note: print quality, acceptable, low, or too low. A low-res file will look soft or pixelated on the wall, especially in photos. Replace it with a larger high-resolution image or a vector file. You can still download if you need to, but the printed logos can only be as sharp as the files you give us.
What if my logo file is very large?
Each logo must be 10 MB or smaller — anything over that is not added, and you'll see a message asking you to save a smaller copy. A sharp, high-resolution logo is usually only a few megabytes. An SVG is even smaller. Past a certain point, a bigger file won't print any sharper.
How many logos?
One logo repeated, or a full sponsor list. They rotate across the wall so the same logo never stacks right on top of itself.
What exactly do I get?
One CMYK PDF at the exact size you chose, with the finish you picked (pole pocket or wrap-around) and the safe zone built in. Pole-pocket and wrap-around files are both exactly the size you order — wrap bleed is reserved inside, not added on. Your print shop adds the pocket material outside a pole-pocket file. Walls 16 ft and under are full size, print at 100%. A 33×8 comes at half size (198 × 48 in) — print at 200% — and that's marked in the file name and on the PDF so the shop can't miss it. It's ready to send to the printer.
Can I enter a custom size?
Yes. Type any width from 4 to 40 ft and height from 4 to 16 ft — a 30×8 press wall is a regular size for this. The builder scales your logos to fit; the tool adds columns and rows to fill the wall.
Can I print it anywhere?
Yes. Any shop that prints vinyl or fabric backdrops can take it. You're not locked into a printer.
Can I Velcro this onto a frame?
Yes. Choose Wrap-around frame and type the wrap bleed your frame needs — 2 or 3 inches is common — on the left and right, or all four sides. That wrap is reserved inside the size you order, with fold lines measured in from the edges. Logos stay on the face by default, so they don't fold around the sides. If you want logos to wrap around, switch that on and use Close to edge. For a stand hang, use the 2-inch pole pocket instead.
Is the PDF full size?
If the wall is 16 ft or under, yes — the PDF is full size, print at 100%. A bigger wall, including a 33×8, comes at half size (a 33×8 file is 198 × 48 in) so it stays under the 200-inch limit most RIPs and Acrobat can handle. Print that at 200% for the full 33 ft. Walls 34–40 ft come at quarter size, print at 400%. The file name includes the finished inches and PRINT-AT-200pct, a small note on the PDF says the same, and it's noted under the download button on this page. Wrap-around files are still exactly the size you order — the wrap is inside, not added on.
Can I edit the PDF?
Yes. Your PDF is a vector file, so it opens fully editable in Adobe Illustrator (or Affinity Designer) — you or your print shop can move logos, fix text, or tweak colors before printing.
Can I change the background later?
Yes. Change the color, swap logos or switch sizes as many times as you want before you download.
What size should my logo be?
Any size works. The builder automatically scales each logo to fit your wall size and the layout you choose, so it looks balanced and stays clear of any pocket or wrap area. Just use a high-resolution PNG or JPG (or a vector SVG) so it prints sharp.
Can I get a refund?
Because you can preview your whole wall for free before you pay, all sales are final once the PDF is downloaded — no refunds. If the file itself is broken or won't open, contact us and we'll replace it.
Your logos.
Our setup.
Build the wall, check it, download it. Your printer gets a file they can use.
Build your backdrop →